Here's an unexpected way to use a gear cutter: for making steampunk style strips of clay that form a flower shape. Add your rosette to a ring for a unique piece of jewelry.

Tools and Materials:

Metallic polymer clay (I used Premo! Sculpey® Silver)
Tiny Gears Deco Disc (Infinite Possibilities Create Along Box)
Cog Wheel clay cutter (Infinite Possibilities Create Along Box)
Craft knife
Clay blade
Mica powder
3/8 inch steam punk gear (Infinite Possibilities Create Along Box)
Polybonder glue
Filigree ring blank
Liquid clay

Roll out a sheet of clay, any metallic color, on a medium thin setting, 1 millimeter or less thick. Texture this clay by pressing in the Tiny Gears Deco Disc.
                                                                                                               Then press in the Cog Wheel clay cutter twice.

Use a craft knife to carefully cut around the inner lines imprinted by the Cog Wheel cutter. Also cut out the center imprint and set aside one circle of clay.

Rub metallic mica powder over the texture to highlight.

Use a blade to remove these clay rings from your work surface. Cut between two of the gear teeth on each to turn your rings of clay into strips.

Roll the set aside circle of clay into a teardrop shape. Add a dab of Polybonder glue, then press a 3/8 inch steampunk gear onto the rounded end of the teardrop. This will be your flower center.

Starting with the gear teeth close to the metal gear flower center, wrap your strip of clay around the tear-drop. 
                                                                                                              Once you make one wrap around the center start pinching the bottom of your strip to ruffle it and flare it out as you wrap it around.

As you are wrapping the strip of clay around the center twist the bottom of your flower with the hand that is holding it too meld the clay together and thin out the bottom. 

When you reach the end of one strip of clay start where you left off, adding the second one in the same manner.

Once you've wrapped the second strip around, take a little time to press the bottom edges of the clay strips into the back, twisting and thinning the “handle” you've been holding it by. Then use a blade to trim the handle off flush so you have a rosette that is flat on the back.

  

Bake your rosette at the manufacturer's recommended temperature for at least 30 minutes.

Press a small ball of the same clay you used for your rosette onto the back of your ring blank, making sure that some of the clay comes out through the holes in the filigree.

Now add a small ball of clay to the front of the ring blank, sandwiching the ring between the clay. Make sure these two balls of clay contact each other through the ring. When baked this clay will hold firmly in place on your filigree.

Add liquid clay to this ball of clay, then press in your baked filigree.

Bake your ring one more time for 30 minutes.

You can use a bit of scrap clay to prop your ring upright for the second baking.

Sandy Huntress shares these lovely pendants made tithe Vintage Grunge Create Along Box!   

Materials:

polymer clay, rolled into 1/2 inch to 1 inch log
Gold Leaf Shavings (Vintage Grunge CreateAlong box)
Clay blade
Acrylic block
Vintage Keys Deco Disc (Vintage Grunge CreateAlong box)
Vintage Grunge Magic Transfer Paper (Vintage Grunge CreateAlong box)

Would you like to join the fun and receive an inspiring box full of polymer clay supplies each month?  Sign up to receive your own Create Along Box- Follow this link

Patricia Krauchune created this mixed-media Steampunk autumn heart pendant with many items from the "Fall-ing In Love" Create Along Box. 

Leaf Veins Silkscreen / Falling in Love rubber stamp texture sheet/ Copper mylar grunge foil / Antique Gold Leaf Charm / Ceramic Hotfix Cabochons /
Cernit polymer clay

Klio Tsaliki shares absolutely gorgeous autumn beads made with the "Fall-ing In Love" Create Along Box! 

Fall leaf shaped beads made of Cernit metallic hues. Awesome silk screen included in the box.

Heart shaped leaf beads using the texture mat found in the box. 

Cernit metallic skinner blend was textured and then shaved (mica shift technique).

Again leaf shaped beads with the application of the foil included in the box. Although it was not 100% successful, it added a beautiful effect.

Foil was applied first on a Cernit metallic Skinner blend, then I textured the clay and shaved it (mica shift technique).

The random golden shine is really beautiful.

This was a BEAUTIFUL fall Create Along Box! I was already in fall and leaves mood, so it couldn’t come in a better moment!

Would you like to join the fun and receive an inspiring box full of polymer clay supplies each month?  Sign up to receive your own Create Along Box- Follow this link

Cindi McGee shares her "Turquoise & Leaves" pendant made with items from the Fall-ing in Love/Autumn Leaves Create Along Box!  She used the rubber texture stamp, Grunge Foil& Hot Fix Cabochons 

Patricia Krauchune created this great sea-themed pendant using Souffle polymer clay and a wide variety of items from the Ripples & Waves Create Along Box!  

She used - 

Sandy Huntress created this pretty Enchanted Rose Pendant with items included in the "Enchantment" Create Along Box!  

Learn how to sculpt a delicate rose under glass reminiscent of the one in the beast's castle in Beauty and the Beast, then use it to create your own enchanted piece of jewelry.

The video tutorial for this project is in DropBox: https://www.dropbox.com/s/jhusvgifxvpjwjb/enchanted%20rose%20pendant.mp4?dl=0

Supplies:
bronze clay
pearl clay
green clay
Mini Terrarium glass pendant kit
Rose Trellis flexie stencil or Tudor Rose Deco Disc
Armor All
Liquid clay
craft knife
clay blade
1/8 inch ball tool
scrap of paper or index card

Would you like to join the fun and receive an inspiring box full of polymer clay supplies each month?  Sign up to receive your own Create Along Box- Follow this link

Cindi McGee has been using many of the items from the By the Sea Create Along Box to create summer pendants.  

She used the seashell printed Magic Transfer Paper to create the background for this starfish pendant. 

Cindi used the nautilus shell silkscreen, the Motion of the Ocean rubber stamp, and a metal starfish and clam shell charms from the box to create this unique gold & blue pendant.

She also used the nautilus shell silkscreen, the Motion of the Ocean rubber stamp, one of the metal starfish charms, and some of the glass beads from the box to create this open centered dimensional pendant.  Cindi will be sharing a tutorial for this pendant in the August PCU Magazine!  

Would you like to join the fun and receive an inspiring box full of polymer clay supplies each month?  Sign up to receive your own Create Along Box- Follow this link.

Cindi McGee created this bold Japanese influenced pendant with her Japanese Influenced Create Along Box!   Items she incorporated from the box include:

The resin coating obscures the ginkgo texture a bit in the photo - but you can see how fabulous the texture sheet worked in this "in progress" photo.

Would you like to join the fun and receive an inspiring box full of polymer clay supplies each month?  Sign up to receive your own Create Along Box- Follow this link.

Cindi McGee created this shimmering dragonfly pendant using some of the awesome products in the Dragonfly Dreams Create Along Box!  She used the Dragonfly Deco Disc Stamp to create the wings for her dragonfly.  The shimmering blue mica powder and tiny gemstones from the kit added an extra bit of color and sparkle.  Cindi also has 3 more projects she's working on using the silkscreen, Magic Transfer Paper and the orange texture stamps from this kit! So many creative options in one box!  

Would you like to join the fun and receive an inspiring box full of polymer clay supplies each month?  Sign up to receive your own Create Along Box- Follow this link. 

Today we share a creative mixture of projects made by artist Klio Tsaliki using a variety of items from the Music Soothes the Soul Create Along Box! 

Tin box covered with polymer clay and painted with the beautiful DecoArt metallic paint. Texture was made with several tools, among them the sculpting tools included in the Create Along Box.

The top part is made using my napkin technique and is decorated with small glass rhinestones and sealed with 2part epoxy resin.

Bottom side is made using extruded clay and is painted also with the same DecoArt blue metallic paint.
    Several double sided jewelry pieces. I used the silk screen and the transfer paper as well, each one for the corresponding side.

I like the “old” look of the white part; in fact it was never white; I used a mix of white and beie to create this “old” look. 

Double sided earrings made of black clay and using the silk screen and the stamp for the corresponding sides. Both sides are music themed, one with the texture and one just silkscreened.

Resin jewelry set. Some joyful notes are floating inside the shapes.

Want to try out a Create Along Box for yourself?  Follow this link to subscribe to receive them every month, or purchase one box while supplies last!  These awesome boxes are only available in limited quantities so don't miss your chance to join in and receive fun creative surprise at your door!

Photo courtesy of Janell Sparks

Klio Tsaliki

https://www.facebook.com/klio.tsaliki

https://www.etsy.com/shop/1000and1